4
• The juicer will not run if the unit is not properly assembled. The motor has
a built-in safety feature that will not allow the power to turn on unless the
Locking Bar is locked in place.
• Do not use outdoors.
• Be sure to turn Power Switch to “OFF” position after each use of your juicer.
Make sure the motor stops completely before disassembling.
• Do not use the appliance if the rotating Filter is damaged.
* This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify or force the plug
in any way.
• Do not operate without the pulp container in place.
SAFETY FEATURES
The Power Juicer was designed with safety in mind.
Induction Motor
Your Power Juicer contains an induction motor which not only makes it whisper
quiet, but prolongs the life of your juicer. If you press down on the Pusher too
hard, or overload the machine with fruits and vegetables, the motor may jam,
which will create heat inside, and may cause the unit to shut down, and you may
also smell smoke. If this occurs, turn off the Power Switch and unplug the unit.
Then follow the disassembly, cleaning, and assembly process. Allow 10 minutes
for it to cool. After the 10 minutes you may resume juicing.
Built-In Thermal Cut-Off Switch/Automatic Shut Off
The Power Juicer is equipped with the Built-In Thermal Cut-Off Switch/
Automatic Shut Off feature that shuts off the motor if the unit becomes jammed
or overheated during the juicing process. Prior to shut down, you will most likely
hear the juicer get louder indicating that something has caused the motor to
strain. Should this happen, simply turn off the Power Switch and unplug the
unit. Follow the Disassembly, Cleaning and Assembly process and allow
10 minutes for it to cool. After the 10 minutes you may resume juicing.
The Locking Bar
The Locking Bar holds the juicer Lid/Pulp Guard in place and is connected to an
Auto Shut-Off Switch. If the Locking Bar is not in its full upright and locked
position, the juicer will not start. This is to prevent accidental contact with the
spinning Blade. If the machine is not locked, the motor will not engage and the
Blade will not spin.
SAVE THESE INSTRUCTIONS
