Configuration
37
6.2.6 SNMP Control
From the control group menu, enter 9 to access the SNMP configuration
Figure 6-7 SNMP Configuration Menu
No.
Function
Description
Example/Remark
1. SNMP Control
Enable/disable SNMP
access.
Enable
2.
SNMP Port
Configure port for
SNMP access.
161
After completing these settings, press “0” to return to the configuration menu.
NOTE: The SNMP port applies to the SNMP management port to be used.
SNMP traps are not affected using this setting and always use UDP port 162.
6.2.7 Parameter Group Configuration
From the configuration menu press “3” to modify the SNMP identification information and the speed of
reading data from interSeptor Pro (see Figure 6-8)
Figure 6-8 Parameter Configuration Menu
No Function
Description
Example/Remark
1.
sysContact
Alphanumeric string
Technical Support Team
2.
sysName
Alphanumeric string
Multi-Port Sensor
3.
System Location Alphanumeric string
Technical Support Lab.
4.
Poll Rate
Amount of time in seconds between sensor polls. 1
Summary of Contents for InterSeptor Pro
Page 5: ...interSeptor Pro 5...
