iMeter
3.1 Adding a notification
a)
First click on the “notification wizard”
b)
The notification wizard page is displayed, as below;
We will now go through setting up a few different ways of notification step by step.
3.2 SNMP Trap
First we will set up a notification via SNMP trap, so that when the sensor reaches a certain
threshold it will send a notification to an SNMP server.
This tutorial provides the information needed to setup an SNMP trap.
To get to the starting point of this tutorial:
•
Log in as administrator
•
Click the “Notifications” tab
•
Choose “Notifications wizard”
•
Choose SNMP trap
Summary of Contents for iMeter Master
Page 2: ...iMeter ...
Page 40: ...iMeter LED patterns in Normal mode then LED patterns in Safe mode ...
Page 41: ...iMeter then ...
