iMeter
Continuous Time to Report High Warning:
As above but delays notification for
“High Warning”
Continuous Time to Report for Normal:
As above but delays notification for return
to “Normal” state
Continuous Time to Report for Low Warning:
As above, but delays notification for
“Low Warning” state.
Continuous Time to Report for Low Critical:
As above but delays notification for
“Low Critical”
state.
Continuous Time to Report for Sensor Error:
As above, but delays notification
being sent for sensor going into an error state.
Example
: An airflow sensor or water detector may have temporary drops in readings
which are normal operating characteristics; a logical counter measure to prevent
unwanted alarms would be to set a time limit to show abnormal conditions.
Enable Calendar:
If you select this option then the following will be displayed;
As an example an office building is to be monitored between the hours of 7 PM
–
9
AM Monday
–
Friday only. In this picture we have selected th
e “Do Not Report” option
for the hours in which we do not wish to receive any notifications or have any events
logged. To change the status of a time frame (Report / Do Not Report) simply click on
the square. This will change it from blue to grey, a second click will return it to blue.
Summary of Contents for iMeter Master
Page 2: ...iMeter ...
Page 40: ...iMeter LED patterns in Normal mode then LED patterns in Safe mode ...
Page 41: ...iMeter then ...
