R E T U R N T O " TA B L E O F C O N T E N T S "
N O I S E G U I D E – M A N U A L
24
24
NAVIGATING THE SOFTWARE
IMPORT DATA FROM USB
1. Connect a USB-key to your Noise Guide.
While the data is exporting from the internal log to the
USB-key, the Ear-symbol will light yellow. It may take up
to a few minutes, depending on the amount of data.
2. Remove the USB-key from the device when the yellow
light has stopped flashing. Insert the USB-key in your PC.
3. Open the software and click ”Import from USB”.
The software will open the folder automatically.
4. Select the file you want to import.
5. The software now converts the ear-file to a CSV-format
and saves the file in the library.
FACTORY SETTINGS
If you wish, you can always restore the Noise Guide's Factory Settings. We recommend that you install the Factory
Settings whenever the firmware is being updated. You can also restore the Factory Settings if you want to reset the
internal memory in your Noise Guide.
