N O I S E G U I D E – M A N U A L
R E T U R N T O " TA B L E O F C O N T E N T S "
15
RED EAR SETTING
By default, the red Ear-symbol will
be lit for 1 second when the noise
limit is exceeded. Under ”Light Set-
tings” you can change the duration
and type of alarm:
• Lit 1 sec.
• Lit 2 sec.
• Flashing 1 sec.
• Flashing 2 sec.
LEQ 15/ 30/ 60
By default, the light panel at the
bottom of the device will indicate
the average noise level over the past
15 minutes.
In ”Light Settings” you can set the
light panel to show the average noise
level for the the past 15, 30 or 60
minutes.
In ”Light Settings” you have the op-
tion of switching off the light alarm
for a certain duration of time.
• Check the box ”Light off”.
• Select a time period for the lights
to be switched off.
Please note!
The internal memory
will continue to log data disregarded
that the lights are swithced off.
PLEASE NOTE!
If your Noise Guide is connected directly to your PC, remember to save your settings by clicking on
”Configure”. Click ”Export to USB” if you are performing an offline configuration.
SETUP
