3
english
Jabra HaNDSET 450 for CiSCo
ConneCting
the Jabra Handset 450 for Cisco is plug-and-play.
1. Connect the usb cable to the handset cradle, and then plug
the usb cable into any available usb port on your pC.
2. dock the Jabra Handset 450 for Cisco in the handset cradle.
to pair a new handset with the cradle, simply dock the new
handset in the cradle. only one handset can be paired with the
cradle at a time.
CHarging
the Jabra Handset 450 for Cisco will charge when docked in the
handset cradle. the handset cradle must be plugged into a usb
port, and the pC must be turned on. low battery will be indicated
when there is less than 1 hour of remaining talk time.
