6
en
g
li
sh
Jabra EXTREME – FOR PC
PaIrInG your heaDset WIth your Phone
headsets are connected to phones using a procedure called
‘pairing’ . by following a few simple steps, a phone can be paired
with a headset in a matter of minutes .
1. Put the headset in pairing mode
- When you turn on your Jabra EXTREME for the first time, the
headset will automatically start up in pairing mode – i .e . it is
discoverable for your phone . When the headset is in pairing
mode the LED is constantly lit blue .
2. Set your Bluetooth® phone to ‘discover’ the Jabra EXTREME
- Follow your phone’s instruction guide . First make sure that
Bluetooth®
is activated on your mobile phone . Then set your
phone to discover the headset . This usually involves going
to a ‘setup,’ ‘ connect’ or ‘
Bluetooth®
’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a
Bluetooth®
device .*
3.
Your phone will find the Jabra EXTREME
- your phone will find the headset under name “Jabra EXTREME” .
your phone then asks if you want to pair with the headset .
accept by pressing ‘yes’ or ‘Ok’ on the phone and confirm with
the passkey or PIn = 0000 (4 zeros) . your phone will confirm
when pairing is complete .
EXTREME
EXTREME
EXTREME
In case of unsuccessful pairing, put the Jabra EXTREME into pairing
mode manually . Make sure the headset is on . Press and hold the
answer/end button for approximately 5 seconds until the LED has a
constant light . keep holding down the button until light is constant .
WearInG styLe
The Jabra EXTREME is ready to be worn with or without the ear
hook . The ear hook can be removed and the headset can be used
with the ultimate-fit Eargels
TM
.
The ultimate-fit Eargels
TM
can be used for both left and right wearing .
* Phone dependent / For use with PC, Jabra PC Suite needs to be installed and
running on PC
