5
en
g
li
sh
Jabra EXTREME – FOR PC
CharGe your heaDset
Make sure that your headset is fully charged before you start using
it (duration app . 2 hours) . use the aC power supply to charge from
a power socket . When the light indicator (LED) has a solid LED light,
your headset is charging . When the LED light is solid green and
goes into quiet mode, your headset is fully charged .
use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset .
What you see
Charge Level
Solid Red
Less than 70% charged
Solid yellow
between 70% and fully charged
Solid Green - quiet mode
Fully charged
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .
turnInG your heaDset on anD oFF
- Slide the on/off button forward on the side of the headset to
turn on the headset . The LED will flash green for a second when
the headset is on .
- Slide the on/off button backward to turn off the headset .
Pre PaIreD
your headset is already pre paired to the uSb adapter out of the
box . If pairing is deleted and later pairing is needed this is done in
a few easy steps .
1 . Put the uSb adapter into pairing mode by pressing the button
on the uSb adapter until the LED light is solid blue .
2 . Put your headset into pairing mode by pressing the MFb until
the light in the headset is solid blue and wait a few moments .
3 . When the blue light on both headset and uSb adapter is blinking,
pairing is complete and the headset and uSb adapter will connect
automatically and the LED on the uSb adapter turns solid green
and the green LED on the headset is blinking .
