1. Undock the primary headset.
2. Turn off the additional headset by holding the
Call
button for 4
seconds.
3. Hold the
(3 seconds) on the base. The conference LED
will flash.
4. Put the additional headset into pairing mode by holding the
Call
button
for 5 seconds until the LED on the headset flashes blue. The base and
the headset will attempt to pair.
5. Press the
Call
button on the primary headset to accept the additional
headset and complete the pairing. The audio is then shared between
headsets, which are muted by default.
End or leave a conference call
To end the call for all headsets, press the
Call
button on the primary
headset, or dock the primary headset in the base. Additional headsets can
leave the conference by pressing the
Call
button on the headset or by
docking the additional headset in the primary headset base (not the
additional headset base). The conference call will continue for all other
headsets.
Permanent conference mode
By default, the conference will end automatically for all additional
headsets when the call ends. To continue the conference with the
additional headsets until the primary headset is docked, change this
specific setting in Jabra Direct.
06/04/2021 20:43
/supportpages/jabra-engage-65/9553-553-117/faq/fc22e06a-4783-42e4-9446-
47c7b06676ea
Page 2 of 2
