8
EN
g
LiS
h
Jabra A7010 Bluetooth hub
9
EN
g
Li
Sh
Jabra A7010 Bluetooth hub
how to pair your Jabra a7010 and headset
imPORTanT:
refer to your headset’s user manual for information about how to pair it to another device.
·
Set your headset into pairing mode according to its user manual.
·
Set your Jabra A7010 in pairing mode by
pressing and holding
its pairing button (3). The LED (2) will show
a steady blue light and the Jabra A7010 will ‘search’ for a headset.
nOTE:
The Jabra A7010 will continue to ‘search’ for a headset for 5 minutes.
·
When your headset and Jabra A7010 have paired successfully, the Jabra A7010’s LED (2) will flash blue
10 times. your headset may also give an audible or visual indication (see its user manual).
nOTE:
If you accidentally put the Jabra A7010 into pairing mode,
tap
the pairing button (3) to exit pairing
mode.
your Jabra A7010 can be paired with multiple headsets. If the Jabra A7010 has been paired with multiple
headsets, and more than one headset is in range, the Jabra A7010 will seek to establish communication with
the most recently connected headset.
adjusting settings with a test call from your desk phone
·
Place your headset on your ear and
tap
the headset Answer/End button.
·
The handset will be lifted automatically, establishing a dial tone.
