JABO JABO-5CG Instructions Manual Download Page 4

 

http://zhyk.en.aliaba.com

 

5. Push the left stick to the left/right, the left/right sailing light is flashing. Meanwhile the motors 

will turn to left/right. 
6.

Feeding bin:

 To avoid wrong operation, there is a safety button on the remote control. When operating   

the feeding bin, the user MUST press the FUNCTION button and push the right stick to the left/right at the   
same time, the corresponding feeding bin will open. To open both bins at the same time, just press   
FUNCTION button and push up the right stick at the same time. When the bins are open, please make   
sure the 2 hook pins should return to the cabin so that the fish wire can be released. 
7. 

Front light:

 pull down the right stick to turn on/off the front light.   

Remote control instruction

 

 

Please turn on the remote control first, then turn on the bait boat switches. 

Left stick:

 steer 

Forwarding:

 push up the left stick gradually, the bait boat starts moving forward. Both left and right turn 

lights are on.   

Left/right turn

push the left stick left or right, the bait boat will turn to the corresponding direction.   

Reverse: 

pull down the left stick gradually, the bait boat will reverse. Meanwhile, both signal lights will 

flash. 

Stop:

 release the left stick, the bait boat will stop moving. 

The remote control display also indicates the bait boat's direction. 

Right stick:

 feeding bin control and fishing light switch 

Press FUNCTION button and push up the right stick at the same time, both bins will be 

open at the 

same 

time. Keep push the stick to release both hooks.

 

Summary of Contents for JABO-5CG













Reviews: