JABO 2AG, User Manual, Page: 12 / 14

12
Fishing line lanyard diagram:
Common problems when using the nest boat:
1 The nesting boat cannot return to the set starting point or is far away from the set
nesting point:
This situation is mainly because the time to set the starting point is relatively short
after the ship is turned on, and the receiver has not received GPS signals stably.
Improved method After the ship is turned on, delay 3-5 minutes to set the starting
point, or press the N key to select the "set starting point" option to reset the
starting point after returning home.
2
How to check the distance traveled by the nest boat: Press
▲
key 3 times, the
screen displays
0
：
XXXX m XXXX the distance of the boat from the starting point
X
：
XXXX m XXXX the distance from the boat to the target point
3
Whatto do if the round-trip trajectory when navigating the nest boat is no
t a straight line, but a curved curve:
It can be adjusted by "COMP Angle" in the setting options,The specific met
hod is: press the S key to enter the setting state,andthen press up twice t
o enter the
“
COMP Angle
”
If the boat is obviously to the left when navigating (returning), you can pr
ess-and the value can be adjusted from -1 to -30
You can set it to -10 first, and try to see if there is any improvement.
If the boat is obviously to the right when navigating (returning), you can press the
+ sign, the value is adjusted from 1 to 30
You can set it to 10 first, and try to see if there is any improvement.
4 If you want to baot the ship during automatic forwarding or automatic
navigation,press the A/H key.
COMP Angle
-10
COMP Angle
10