Telephone dialer TD-101 / TD-101W
- 18 -
MDJ512 10
Telephone dialer TD-101 / TD-101W
- 7 -
MDJ512
10
6.4. Entering telephone numbers and data for PAGER
Telephone numbers and data can be entered in the user mode (the green LED is ON - see 6.1.),
entering:
DDDD
...
D
M
E
where:
D
can be
to
or
B
i.e. pause. Pause can not be used as a first digit. You can enter a
maximum of 26 digits. If the
F
key is entered, it will make a long pause and will switch for
tone dialing if pulse dialing is selected (so
F
key should be used as a message code
separator),
and
can also be dialed if tone dialing method is selected
E
is the tel. number memory
or
(with IN1 triggering, the number
Mem5
will be dialed,
with IN2 triggering the number
Mem6
will be dialed). Remote control button or
F
key
pressing has the same effect as IN2 triggering. If both inputs IN1 and IN2 are triggered
simultaneously, the dialer will call the first pager according to
Mem5
and then the second
pager according to
Mem6
.
Example:
F
„Pager number“
„message“
M
E
Format of the pager number and data can be different, check details with your PAGING provider.
6.5. Deleting telephone numbers
Telephone numbers for voice & pager messages can be deleted in user mode (the green LED is ON
- see 6.1.), entering:
B
M
E
where:
E
is the memory number
1
to
6
which will be erased. If a number is erased, the corresponding
dialing will not be performed
Example: Deleting of telephone number from memory
Mem3
:
B
M
6.6. Remote control code learning
(only for model TD-101W)
A new remote control can be taught to the dialer in the user mode (the green LED is ON - see 6.1.),
entering:
M
After entering
M
the dialer is in the remote control learning mode. Activate all the remote
controls (max. 3) one by one. Learning of the remote control is confirmed with a beep. Close the
learning mode by pressing the
E
key (learning of the third remote control will close it automatically).
Closing is confirmed with two beeps. Both buttons of the remote control have the same function.
Note: when the first remote control is taught in the learning mode, all previous remote controls are
forgotten.
6.7. Erasing of remote controls
(only for model TD-101W)
All remote controls can be erased from the TD-101W memory in the user mode (the green LED is
ON - see 6.1.), entering:
M
B
Note: This instruction can be used if you lost your remote control.
