The JA-152P / JA-152P (G) Wireless PIR motion detector
The JA-152P / JA-152P (G) Wireless PIR motion detector
2 / 2
MMO57101
Detection characteristics
The detector is fitted with a lens (2) covering an area of 90°/12 m with
3 beams (curtains) – see figure 3.
The lens cannot be replaced
by a different type of lens.
This detection characteristic is the same for
both the white and the grey lens.
Figure 3. This detection characteristic is valid for standard PIR immunity.
Installation accessories
JA-196PL-B-S – Detector wall holder
When an aesthetic installation is required, it’s possible to install
the detector on a wall surface using a JA-196PL-B-S aesthetic frame
and mounting box, which is distributed in two colours – white and grey.
Using the frame, the detector is partially hidden under a plaster
or plasterboard wall.
JA-191PL – PIR jointed bracket
It is used for special placement, such as installation on the ceiling
or at a tilted angle (higher installation height). The jointed bracket
is a certified detector accessory having its own tamper contact which
is to be connected to the connector inside the detector (7).
Technical specifications
Power
1 Lithium battery type CR123A (3 V/1500 mAh)
Please note: Battery not included
Typical battery lifetime
4 years
(the longest in smartwatch mode, at 20°C)
Low battery voltage
< 2.4 V
Current consumption in standby mode
30 μA
Maximum current consumption
100 mA
Communication band
868.1 MHz, JABLOTRON protocol
Communication range
approx. 300 m (open area)
Recommended installation height
2.2 – 2.5 m above the floor
Detection angle / detection coverage
90°/12 m
Dimensions
62 x 110 x 40 mm
Weight (without battery)
90 g
Classification
Security grade 2/Environmental class II
(according to EN 50131-1)
Operational environment
Indoor general
Operational temperature range
-10 °C to +40 °C
Average operational humidity
75 % RH, non-condensing
Certification body
Trezor Test s.r.o. (no. 3025)
Complies with
EN 50131-1 ed. 2+A1+A2, EN 50131-2-2,
EN 50131-5-3+A1, EN 50131-6 ed. 2+A1,
ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1,
EN 55032, EN 62368-1, EN 50581
Can be operated according to ERC REC 70-30
JABLOTRON ALARMS a.s. hereby declares than the JA-152P
(G) is in a compliance with the relevant European Union
harmonisation legislation: Directives No: 2014/53/EU,
2014/35/EU, 2014/30/EU, 2011/65/EU, when used as intended.
The original of the conformity assessment can be found
Downloads
section.
Note:
Although this product does not contain any harmful
materials we suggest you return this product to the dealer
or directly to the producer after use.
