Aircraft Technical Manual
Jabiru Aircraft
Pty Ltd
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated: 29th October 2014
Issued By: AS
Page: 166 of 298
Figure 117 - Flap Cross Tube Assembly (J120)
6.59 Flap Position Indicator (all J-Series)
6.59.1 Description
2 different flap position indicators have been used in Jabiru Aircraft (plus the manual handle which
also acts as the position indicator for manual flap variants).
Both indicators consist of a cable-driven indicator which moves inside a housing. Indicators are
mounted to the windscreen / door pillars.
6.59.2 Flap Position Indicator Removal
Required Tools:
Screwdriver
Drill
Spanners / Socket wrench
Parts and Material:
N/A
Type of Maintenance:
Line Maintenance
Level of Certification:
L1, L2 or LAME (Owner, A&P or LSA Repairman / Maintenance)
Return to Service:
L1, L2 or LAME (Owner, A&P or LSA Repairman / Maintenance)
1.
Undo screws holding indicator to “A” pillar.
2.
For Type 1 indicators: drill rivets and disassemble indicator.
3.
Loosen bolt on flap drive motor shaft & remove cable.
