![background image](http://html1.mh-extra.com/html/jabiru/j120/j120_technical-manual_3130523047.webp)
Aircraft Service Manual
Jabiru Aircraft
Pty Ltd
JTM001-1
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
REVISION
1
Dated: Nov 2011
Issued By: SW
Page: 47 of 233
Figure 12
– Aileron Clearance
Figure 13
– Test Load Application
Figure 14
– Elevator Gap Cross Section
Aileron at full deflection,
open control gap showing
Use gauges (such as the 3mm type
shown), vernier callipers or a ruler to
measure
the
control
clearance
between aileron and wing
Control at the point of overlap. Measure the
control clearance in this position while pressing
on the control in the middle of the hinge. Repeat
the measurement when unloaded.
Interference here at full forward stick deflection
can cause control travel restriction.
Control at the point of
overlap - Leading edge of
aileron in line with trailing
edge of wing
“Control gap”
Control at the point of overlap. Measure
the control clearance in this position
while pressing on the control in the
middle of the hinge. Repeat the
measurement when unloaded.
Press against hinge in this
location (within 25mm of
hinge line) & direction