Jabbla Zingui, Manual

Page: 13 / 36

Zingui
7
4 - Connectors and indicators
4.1 At the display side
4.1.1 Light sensor
(1)
The light sensor measures the environmental light and allows the Zingui to
automatically adapt the backlight of the display. This will optimize power
consumption and increase battery life.
The light sensor can be switched off if necessary. For more information
on switching off the Light sensor see“Brightness” on page 20.
4.1.2 Microphone
(2)
The microphone allows to make high quality recordings. You do not need to talk
close to the microphone or raise your voice. Keep a distance of about 12 inches
while recording.
4.1.3 The battery charging indicator (3)
The battery charging(3) indicator lights up as soon as you connect the Zingui
with the power adapter to the mains. The battery indicator turns from orange
into green during the charging process. A green battery indicator indicates that
the battery is fully charged.
Charging an empty standard battery should take about 90 minutes. Charging the
double size battery should take 3 hours.
Do not use another power adapter than the one that is delivered with the Zingui.
Using another adapter could damage the internal circuits or the battery.
4.1.4 The on/off indicator (4)
The on/off indicator (4) shows the power status of the Zingui.
When the Zingui is completely turned off, the on/off indicator will not blink nor
light up. In standby mode you can see the on/off indicator blinking shortly every
4 seconds.
During start up the on/off indicator blinks green for one second every other
second. Blinking turns into continuous lit when the Zingui has finished the start
up procedure and is ready to be used.
4.1.5 The on/off switch (5)
The on/off switch (5) controls the power state of the Zingui. When completely
switched off a short press on the on/off switch powers on the Zingui. Once the
Zingui is powered on, a short press on the on/off switch will put the Zingui in
standby. Power consumption in this mode is very low. If the user can use the on/
off switch easily, taking advantage of the standby mode can increase battery life
significantly. A short press on the on/off switch will immediately wake up the
Zingui.
Press the on/off switch for 4 seconds to completely shut down the Zingui.