Jabbla Vibe, Operating Instructions Manual

Page: 18 / 28

Vibe
7 Resetting the rear display and loudspeakers
NOTE
It is also possible to completely reset the Vibe (see Completely resetting the Vibe on page 16).
CAUTION
Resetting is only permitted if the display and/or the loudspeakers are completely unresponsive.
Figure 12: Reset button
Press the tip of a ball pen into the reset opening (11).
The display and loudspeakers are switched off. Restart the display and loudspeakers and they are ready for use.
8 Completely resetting the Vibe
NOTE
If only the rear display and/or the loudspeakers are not responding, you can reset these separately (see Resetting the rear display and
loudspeakers on page 16)
CAUTION
Only reset the Vibe when it has completely frozen.
Figure 13: On/off button
1. Press and hold the on/off button (6) until the screen goes completely dark.
2. Release the on/off button.
The LED indicator of the on/off button is out and the screen stays completely dark.
3.
Briefly press the on/off button on the device.
The device will restart and can be used again.
See also
Switching on the Vibe on page 10
Shutting down the Vibe on page 17
E Control
16
7 Resetting the rear display and loudspeakers