Vibe
E
Control
1
Switching on the Vibe
Figure 4: On/off button
Press and hold the on/off button (6) for several seconds.
If the device was in sleep mode, it can be used immediately. If the device was switched off, then Windows 10 must be started first.
See also
on page 17
on page 16
2
Charging the Vibe
The amount of time you can use your device without needing to charge it depends greatly on how you use it:
•
the audio volume
•
the time set before the device reverts to sleep mode
•
your Bluetooth and Wi-Fi use
If the device is used a lot, it is recommended to recharge it every day. To do this, use only the supplied power adapter. The device can still be used
while charging. A charge status between 40 % and 90 % increases the service life of the battery.
Charge the device preferably at room temperature (about 20 °C / 68 °F). Temperatures lower than 5 °C (41 °F) and higher than 45 °C (113 °F) can have a
negative effect on the battery.
1.
Check the power status. See
on page 11.
E
Control
10
1
Switching on the Vibe
Summary of Contents for Vibe
Page 1: ...Vibe Operating instructions...
Page 28: ......
