J. W. Davis & Company BVR20, User Manual

Page: 39 / 64

EN 39 38 EN
Eng
lish
Please note the instructions in this section when you make
the first video recording with your Voice Tracer!
5 Video Recording
(
1)On the Preview interface, press the “Video Record”
button to start recording. The device will vibrate twice
briefly, and the state indicator flickers red.
(2)Long press “ ” or “ ” to zoom in and out the preview
interface.
(3)When recording at night, in a low light environment or
of the infrared is in manual mode, please press the "IR"
button to change to night recording mode. The screen will
become black/white.
(4)When recording at night or in a low light environment,
press the " " button to gain more light.
(5)Press the "Capture" button to capture the current video
recording picture.
(6)Press the " " button to mark the file as an important
document, so the file will not be covered when loop
recording or be deleted on the device. It can only be
deleted by formatting the device or through computer.
(7)Long press voice recording button to transfer from video
recorder to voice recorder.
(8)Press the “Video Record” button again to end the
recording. The device will vibrate twice briefly, the red light
goes out, and the device returns to the preview interface.
The state indicator turns green.
Recording Interface Reference:
Illustration of Video Recording Interface:
1 5
7
6
8
2
4
3