The kit is a professional 4K HDBaseT HDMI Distribution Hub Kit, which consists of a
4K HDBaseT Matrix Switcher, 7 HDBaseT Receivers and accessories.
The JTECH-4K88-EX is a professional 8x8 HDBaseT Matrix Switcher that consist of
the following inputs and outputs, 8 HDMI IN (4kx2K@60Hz signal at max), 7 IR IN, 1
IR EYE, 8 IR OUT, 1 IR OUT ALL, 7 HDBaseT OUT, 1 HDMI OUT, 1 SPDIF OUT, 1
L&R RCA OUT, and TCP/IP, RS232 control port via phoenix connector.
The JTECH-4K88-EX-RX is an HDBaseT Receiver that consists of the following
inputs and outputs, 1 HDBaseT IN, 1 IR IN, 1 IR OUT and HDMI OUT. The receiver
is powered directly by the Matrix Switcher.
All HDMI inputs can be selected by either the front panel buttons, IR, RS232 or GUI.
The selected source is delivered to HDBaseT zoned outputs 1~7 & HDMI Output.
The Matrix Switcher is capable of delivering 4K signals up to 40m, 1080p up to 70m
and powering the receivers via a single CAT5e cable. It is however recommended to
use good quality CAT6 cable.
The Matrix Switcher supports EDID management and is HDCP 2.2, 1.4 compliant.
Audio sources can be selected via RS232 commands and TCP/IP at the Matrix
Switcher or by 3rd Party control.
4K HDBaseT
Matrix Switcher
1 x JTECH-4K88-EX 4K HDBaseT Matrix Switcher
2 x Mounting ears & 6 x Screws
4 x Trapezoidal Plastic pads
1 x Power Cord
8 x IR Receivers
9 x IR Emitters
1 x IR Remote
1 x RS232 cable(Phoenix to DB9)
HDBaseT
Receivers
7 x JTECH-4K88-EX-RX HDBaseT Receivers
14 x Mounting ears & 28 x Screws
28 x Round Plastic pads
1 x User manual
INTRODUCTION
PACKAGE LIST
1
