Note
：
Please disconnect all the twisted pairs before sending command
EDIDUpgrade[X].
In above commands, “[”and “]” are symbols for easy reading and do not need to
be typed in actual operation.
Please remember to end the commands with the ending symbols “.” and “;”.
Type the command carefully, it is case-sensitive.
System Commands
/*Type;
Inquire the models information.
XXXX
/%Lock;
Lock the front panel buttons on the Matrix.
System Locked!
/%Unlock;
Unlock the front panel buttons on the
Matrix.
System Unlock!
/^Version;
Inquire the version of firmware
VX.X.X
Demo.
Switch to the “demo” mode, convert input
and output in turn like1B1, 1B2, …4B3,
4B4, 1B1… and so on .The switching
interval is 2 seconds.
Demo Mode
AV:01->01
IR:01->01
……
AV:08->08
IR:07->07
……
PWON.
Work in normal mode.
PWON
PWOFF.
Enter standby mode and cut off the power
supply to HDBaseT receivers.
PWOFF
STANDBY.
Enter into standby mode. (Do not cut off
the power supply to HDBaseT receivers,
press other buttons or send other
commands to start.)
STANDBY
%0900.
Switch to carrier native mode.
Carrier native
%0901.
Switch to force carrier mode.
Force carrier
%0911.
Reset to factory default.
Factory Default
RS232 CONTROL COMMANDS
14
