Configuration of Single Monitor with the
RGB to Component Converter.
Connect the digital set-top box (or DVD player) to the RGB to Component’s SCART
input, then the output directly to the display device with audio. In some systems the
audio may be routed to an external amplifier rather than the display.
Configuration of the Digital Set-top Box and DVD Player.
For Sky Digital, press the "Services" button on the remote control to bring up the
services menu. Go to option 4 - System Set-up. Then to 1 - Picture Settings. Ensure
that Video Output is RGB, not PAL.
Do not
press the "TV" button as this switches off
the RGB output, in this case depressing the “Sky” button will restore RGB output.
On/ITV Digital select menu, "4", then "2" and the TV Output option toggles between
RGB and Composite. The timer function with On/ITV Digital switches off the RGB
output, therefore if recording via the converter leave the unit on the desired channel.
Digital Cable normally has an options menu inside the TV guide where RGB output
can be found.
Please refer to the DVD player’s user manual for options for RGB output and ensure
that it is active.
Connect the digital set-top box (or DVD player) to the RGB to Component’s SCART
input, then the output directly to the A/V amplifier with audio. This will enable the A/
V amplifier to switch both video and audio.
Configuration of Home-Cinema with the
RGB to Component Converter.
