J Plus, Inc
4 Initial Connection
4.1
Cable Connection
Connect a UTP cable from Control PC to local MGMT Port in Small Cell and set the static IP address in the PC
to 10.0.0.100 as shown in Figure 8 or if you have a router you can configure network as described in Figure 9
and connect the UTP cable from WAN port to the router. You can have access to Small Cell through router from
Control PC as well using the WAN IP if the router is configured accordingly.
Figure 8: Small Cell Direct Connection for Management
Figure 9: Small Cell Connection for Management via Network
J Plus Proprietary and Confidential 23 / 98
