Available from:
Twister Hawk
D. LINKAGE CHECKS
1. Check that all linkages and connectors are attached and that rotating parts are free to rotate
smoothly.
2. Check that all linkages move freely with no binding or stiffness. Free off any linkages that show any
sign of tightness or binding.
TRANSMITTER LAYOUT THROTTLE LEFT (MODE 2)
STICK AND TRIM CONTROL SUMMARY
Throttle trim
Fore and aft cyclic trim
Throttle/Yaw
stick
Cyclic control
stick
Yaw trim
Roll cyclic trim
1. Move the throttle (left stick) and throttle trim of your transmitter to the lowest (low throttle) position
as shown above.
2. Centre the trim levers of the 3 other transmitter functions.
3. Extend the transmitter aerial fully.
4. Switch on the transmitter.
8
Summary of Contents for Twister Hawk
Page 24: ...Available from www modelflight com au Twister Hawk 24 http www jperkinsdistribution co uk...
Page 25: ...Available from www modelflight com au Twister Hawk http www modelengines com au 25...
Page 26: ...Available from www modelflight com au Twister Hawk 26 http www jperkinsdistribution co uk...
