background image

2

P47 Thunderbolt Instruction Manual

Vital safety info 

cAutIon!  the P-47 thunderbolt is not a toy.  

It can cause injury to persons/animals and/or property 

if not used correctly.  It is unsuitable for persons under 

the age of 14.  you should take care and observe the 

principles of safety when flying this model. In the uK, 

we recommend you observe the british model Flying 

Association (bmFA) safety code at all times, which can 

be found at the following address: http://www.bfma.org 

In Australasia, please contact your hobby supplier.

you Assume All rIsK.

before beginning construction, please read this 

document thoroughly and familiarize yourself with the 

construction sequence of the P-47 thunderolt.  If any 

information in this manual is unclear, please contact 

your supplier for help.  After reading this manual store 

it in a safe place for future reference.  this is a kit 

for intermediate and advanced flyers, basic rc flying 

knowledge and skills are required.

about the flying area 

required

If you are a newcomer to R/C flight and have never flown 

a radio control model before; it is vital you seek advice 

from an experienced model pilot on where and how to fly.

Only fly in large open spaces that are approved for R/C 

model flying and that are away from people, animals, 

buildings, power lines, water or trees.

Only fly in bright sunny conditions where wind speed does 

not exceed 5mph.

training, crashes & spares

The P-47 Thunderbolt has been designed to be strong and 

very easy to repair, however, it is not invulnerable and 

most people will break parts during their flying career.  

This is quite normal.  All parts are available as spares 

from your supplier.  Crash damage is not covered by 

warranty.

important notice

This manual is supplied with all versions of the P-47 

Thunderbolt.  Please note that any reference in this 

manaul to the Transmitter, Receiver, Charger and Power 

supply are not applicable to the P-47 Thunderbolt version 

supplied without TX/RX, Charger and Power supply.

contents

Vital safety info  ............................................................... 2
About the flying area required ...................................... 2
training, crashes & spares ............................................ 2
Guarantee/warranty ........................................................ 2
History of the P-47 ........................................................... 3
Kit contents ....................................................................... 3
lithium polymer battery safety ..................................... 4
lithium polymer flight battery ....................................... 4

Charging the flight battery .......................................... 5

Assembling the P-47 ....................................................... 6
Assembling the propeller ............................................ 10
switch on the transmitter ............................................ 11
transmitter layout .......................................................... 12

Mode II transmitter layout ........................................ 12

Mode I transmitter layout ......................................... 12

Pairing the esc and transmitter .................................. 12
control checks ............................................................... 13
Preflight checks ............................................................. 14
Flying................................................................................ 15

Take-off ........................................................................ 15

Landing ........................................................................ 15

guarantee/warranty

J. Perkins Distribution Ltd and Model Engines (Aust.) Pty. Ltd. guarantee this product to be free of manufacturing and assembly 

defects for a period of one year from time of purchase. This does not affect your statutory rights. This warranty is not valid for any 

damage or subsequent damage arising as a result of a crash, misuse, modification or for damage or consequential damage arising 

as a result of failure to observe the procedures outlined in this manual. Operation of this model is carried out entirely at the risk of 

the operator. Please note that, whilst every effort is made to ensure the accuracy of instructions and material included with this 

product, mistakes can occur and neither J. Perkins Distribution Ltd/Model Engines (Aust.) Pty. Ltd. nor it’s distributors will be held 

liable for any loss or damage arising from the use of this model or for any loss or damage arising from omissions or inaccuracies in 

the associated instructions or materials included with this product.

We reserve the right to modify the design of this product, contents and manuals without prior notification. 

© 2009 J Perkins Distribution Ltd, Lenham, Kent, UK ME17 2DL.  www.jperkinsdistribution.co.uk 

Model Engines (Aust.) Pty. Ltd., Noble Park, Victoria 3174, Australia. www.modelengines.com.au. 

All rights reserved. E&OE.

weee disposal

Do not dispose of this product with other household 

waste.  Instead, it is your responsibility to dispose of 

your waste equipment by handing it over to a designated 

collection point for the recycling of waste electrical 

and electronic equipment. The separate collection and 

recycling of your waste equipment at the time of disposal 

will help to conserve natural resources and ensure that 

it is recycled in a manner that protects human health and 

the environment. For more information about where you 

can drop off your waste equipment for recycling, please 

contact your local council, your household waste disposal 

service or the shop where you purchased the product.

Summary of Contents for P-47 Thunderbolt

















Reviews: