J.E. Adams 9420-1G-DIG, Owner'S Manual

Page: 7 / 12

6. “dE” is now shown on the display for a brief moment.
At this step, set the default tire pressure, value which
is factory set at 32 PSI. Use + or - buttons to set.
Press “i” button to continue .
7. “LS” is now shown on the display. This is typically
set to 70 PSI which is the maximum pressure value.
Press “i” button to continue .
8. “nº PU” is shown on the display for a short moment and
then a two digit vaule is displayed. This represents the
number of coins to activate machine.
9. 00 is for free vend, 01 for one coin, 02 for two coins,
and so on. Choose by using + or - buttons.
Press “i” button to continue
Note:
vacuum and air compressor are not able to be priced or
timed at separate values. The programmed price gives you the
programmed time regardless of function chosen.
10. “Dur” is now shown on the display which represents
the amount of time per coin in seconds. If
machine is set to “00” free vend, this option
will not be present. Set time per coin by using “–“ or “+” buttons.
Press “i” button to continue
11. “Conn” is now shown for a brief moment and then the
setting. Leave this at "cont". See quick programming
section of manual for full explanation.
Press “i” button to continue
12. “nnod” is shown on the display which is for the modem setting.
3/30/2011 7