J.E. Adams 9217, Manual

Page: 10 / 21

REV 6-11-2019 10
Bill acceptor:
Bill acceptor comes pre programmed from J.E. Adams and should not require any changes. If additional
programming is needed to acceptors please refer to additional literature sent along with this unit.
Operating Instructions:
•
Insert coin(s) into machine to start.
•
In the case of a push button kit, press push button to activate machine. It will automatically shut off.
•
Remove vacuum hose from hanger and vacuum subject accordingly. Do not vacuum wet objects or fine dust (ex
– drywall dust).
•
Return vacuum hose to hanger when finished.
•
In the case of a dual hose model, hose claw must be returned to hanger and set against rubber pad to eliminate
leaks in vacuum system. This will allow the opposite hose to have more suction while in use.
Maintenance:
•
All servicing of machine should be conducted by an authorized service representative!
•
Filter bags should be accessed and shaken down weekly. It is recommended to keep a new set of bags on hand.
•
To maintain performance, empty dirt bin from the canister on a regular basis. This is very important!!
•
Periodically inspect wires and connections for wear or fatigue.
•
Check vac hose for cracks on a weekly basis.
•
Clean canister with a stainless steel cleaner as needed. Decals can be cleaned with mild soap and water.
•
Check motor brushes approx. every 3 months for excessive wear. Motor brushes should be changed if they are
shorter than 3/8”.
Please disconnect power before doing this.
DISCONNECT POWER BEFORE SERVICING OR TROUBLESHOOTING!