Display programming with push button:
•
Unit can be programmed using buttons that are located inside display. One is
labeled
S2
, which is used to change from item to item. One is labeled
S1
which is used to set desired value. If you hold down
S1
this will cause numbers
to decrease. If you repeatedly push
S1
numbers will increase.
•
When programming with buttons use same instructions as remote except for
the following. Where it says to press
CH +
use
S2
and where it says to use
VOL +
or
–
use
S1
.
Operating Instructions:
•
Select desired function.
•
Insert coins or bills to start desired function.
•
If shampoo/spot is selected, it is recommended that you vacuum before
applying formula.
•
If other function is selected other than original selected item unit will
recalculate timer based on the amount of money it takes to start the specific
function.
•
Once service is used, hang up hose.
Operating Instructions 29000UNI-29003UNI:
•
Select desired function.
•
Insert coins or bills or swipe credit card to start desired function. When credit card
is selected swipe card and wait for activation.
•
If shampoo/spot is selected, it is recommended that you vacuum before applying
formula.
•
If other function is selected other than original selected item unit will recalculate
timer based on the amount of money it takes to start the specific function.
•
Once service is used, hang up hose.
Changing fluids:
•
Disconnect power. Unscrew cap from empty bottle. Remove empty bottle.
Insert new bottle into unit. Insert line into bottle and screw cap onto bottle.
Reconnect power
Maintenance:
•
Filter bags should be taken out weekly and shaken out. Also it might be a good
idea to keep a new set of bags on hand so that once a month or longer you can
take original bags out and wash them.
•
Check vac hose for cracks on a weekly basis.
•
Check shampoo and spot formula bottles to assure that they are full.
•
Clean canister with a stainless steel cleaner as needed.
•
Check motor brushes approx. every 3 months for excessive wear. Motor brushes
should be changed if they are shorter than ¼”.
Please disconnect power
before doing this.
•
Check all shampoo lines and assembly for any signs of wear.
•
All servicing of machine should be conducted by an authorized service
representative.
8
