J.E. Adams 29000 Series Owner'S Manual Download Page 7

turned off to reactivate. Restart on allows for additional coins to be put in the 

machine to keep unit running. To set use 

VOL –

 or 

VOL +

 to change. 

17)

 

Press the 

CH +

 button. Display will now read 

STD

 or 

USER

 or 

MIX

. To make a 

custom message use 

VOL +

 button to scroll to USER. At this point press and hold 

CH +

 button until original message appears. At this time you may change the 

message simply by using the 

VOL –

 or 

VOL +

 buttons to change letters. 

Once 

message has been entered you must put the symbol / at the end of 

message.

 This will tell display that this is the end of the message. 

18)

 

Press the 

CH +

 button now 5 more times to exit programming. 

19)

 

Unit should now be programmed. 

 

Program definitions: 

 

Bonus time settings: 

¾

 

Amount of time set in bonus time is added to regular time per 
coin/pulse(e.g. if you want to give 45 seconds for bonus time and 

your regular time per coin is 30 seconds, you would set bonus time 

at 00:15) 

¾

 

Bonus is disabled by setting bonus time to 00:00. 

¾

 

If bonus time is set to less than one minute, bonus time is added 
when bonus coin is reached and every coin after that until time 

expires. 

¾

 

If bonus time is set at 1:00 or more, bonus will be a “one time” 

bonus. Bonus time will only be added for bonus coin or multiplies of 

bonus coin (e.g. 16

th

 coin, 32

nd

 coin, etc). Any other coin will on 

receive regular time per coin. 

¾

 

If bonus time is set to 99:00, when bonus coin is deposited, timer 
will show “-on-“ and timer will continue to run until coin switch wire 

is shorted to ground by a loop detector or other switch closure for 

a minimum of two seconds. 

 

 

Debit and credit mode: 

¾

 

Debit mode: As coins are deposited display shows “$1.75 MORE, 

$1.50 MORE, $1.25 MORE” etc. until start price is reaches. Once 

start price is reached display switches to time accumulating until no 
more coins have been deposited. 

¾

 

Credit mode: As coins are deposited display shows money 
accumulating ($.25, $.50, $.75 etc). If timer is also set to delayed 

start mode timer will continue to show money accumulating until 

no more coins have been deposited. If timer is set to instant start, 
as soon as start price is reached, timer will change to time counting 

down. 

¾

 

Both mode: As coins are deposited display shows money 

accumulating ($.25, $.50, $.75 etc). If start price is not reached, 

after 5 seconds timer will alternate between “add $x.xx more” and 
amount of money already deposited.  

 

 

7

Summary of Contents for 29000 Series




















Reviews: