INSTALLATION
Installation
Dia.1.
1.
Place the fitting on the required position
turn the switch bottom from the solar
panel on and test the fitting.
The LED light only can operate under a dark
atmosphere.
Battery Replacement (If required).
Dia.02.
1.
Remove the solar panel box from the fit-
ting.
2.
Using a screw driver (not supplied),
un
-
screw the screws from the solar
panel box.
3.
Open the box and remove the old
battery.
4.
Insert new battery and close the box.
5.
Re
-
screw all the solar panel box screws
6.
Re
-
attach solar panel box
This product is suitable to use Nickel metal
Hybrid battery, abbreviated NI
-
MH, any
other batteries type are not accepted.
Cleaning
-
Use a clean dry soft or slightly damp cloth.
-
Do not use abrasive cloths or polishes as this may
cause damage to the product.
APPROVED
06/11//2019
ISSUE 1
Q.C
Maintenance
PD531
J D Williams & Company Limited is part of N Brown Group plc. Griffin House,
40 Lever Street, Manchester, M60
6ES
Dia.1
Dia.2
