INSTALLATION
1
Installation
Dia.1.
1.
Un
-
screw the top section of the fitting.
2.
Turn on the on/off switch.
3.
Re
-
screw the top section of the fitting.
4.
Attach the pole to the fitting as illustrated.
5.
Remove the spike from the pole.
6.
Attach the spike to the pole in the posi-
tion illustrated.
7.
Place the fitting on the required position
and test.
The LED light only can operate under a dark
atmosphere.
Battery Replacement (If required).
Dia.02.
1.
Un
-
screw the top section of the fitting.
2.
Using screw driver (not supplied)
un
-
screw the screws from the battery
compartment.
3.
Open the battery compartment and
remove the old battery.
4.
Insert new battery and closed the
battery compartment.
5.
Re
-
screw all the screws from the battery
compartment
6.
Re
-
screw the top section of the fitting.
This product is suitable to use Nickel metal
Hybrid battery, abbreviated NI
-
MH, any
other batteries type are not accepted.
Cleaning
-
Use a clean dry soft or slightly damp cloth.
-
Do not use abrasive cloths or polishes as this may
cause damage to the product.
APPROVED
06/11//2019
ISSUE 1
Q.C
Maintenance
PD479, PD481,PD482
J D Williams & Company Limited is part of N Brown Group plc. Griffin House,
40 Lever Street, Manchester, M60
6ES
Dia.1
Dia.2
2
3
4
5
6
7
