I
NITIAL OPERATION
e) Align the chain and fasten the chain end
link to the middle part using chain end
link bolts
(5)
(position of the weld on the
same level as with the following mem-
bers).
3. Mount the components on the idle chain
a) Slide the buffer washer with edge
(3)
(edge encloses buffer), new buffer
(2)
and buffer washer without edge onto the
chain.
b) Insert the 10th chain link into the chain
pocket of the clamp sleeve
(1)
(chain
pocket away from the hoist body, facing
outward) and secure with bolted connec-
tion or dowel pin.
c) Attach the chain end link in the dead end
chain mount
(9)
.
Figure 10: Installing the chain
5.3. Attach the hoist
DANGER
Danger from faulty installation
A faulty installation may result in serious acci-
dents.
I
Your product
PROFI 2 TI
may only be installed
by qualified personnel.
WARNING
Danger from chain fracture
Vibrations damage the chain and can lead to
chain breakage.
I
The supporting structure must form a rigid
support.
I
Furthermore, no external vibrations may be
transferred to your product (e.g. from the attached
load).
WARNING
Danger from inadequately sized sup-
porting structure
When loads are taken up suddenly on slack chain,
especially at high lifting speeds, impact forces
result that can be several times the load weight.
I
The attachment points and supporting struc-
ture for your product
PROFI 2 TI
must be able
to securely absorb the forces (
,
→
table 1) to be
expected.
I
Ensure that your product can be freely aligned
under load, as otherwise impermissible additional
loads may occur.
Page
30
of 62
Doc.-No.: VA058498-50-OM-EN-1021-62-2