18
Volcan B12 – VESUVE
(Check the distance from center to center mounting holes before installation)
1
Tool required:
measuring
tape, level, pencil, eraser,
Square tip #2 screwdriver,
5 screws of 1½ inches and
3 anchors.
2
Mark the starting point
See figure B
in the corner
using the pencil and
measuring tape.
3
Mark a dot at ½
inch below
your starting point.
4
From that dot, draw a 21 1/16
inches long horizontal line on
each wall and mark a dot.
5
Starting again from that marked
dot mark another one at 2 ½
inches from the corner on the wall
at your right.
6
Insert the anchors on each
of the 3 marked dots.
7
Secure the 3 screws and
leave 5/16 inches between
the screw head and the
anchors.
8
Install the fireplaces and
screw the 2 retaining
screws at their designated
place
see page 6
FIGURE B
Summary of Contents for volcan b12 fogo
Page 24: ...24 FIGURE G...
