![J. A. Roby volcan b12 fogo User Manual Download Page 17](http://html1.mh-extra.com/html/j-a-roby/volcan-b12-fogo/volcan-b12-fogo_user-manual_625842017.webp)
17
ETHANOL FIREPLACES INSTALLATION
GUIDE
Volcan B12 – TRIDENT
(Check the distance from center to center mounting holes before installation)
to install
FIGURE A
1
Tool required:
measuring
tape, level, pencil, eraser,
Square #2 tip screwdriver,
6 screws of 1 1/2 inch and 4
anchors
2
Mark the starting point
see figure A
using the pencil and
measuring tape.
3
Draw a 28 inches long
Horizontal line with the
level from your starting
point
4
Mark a dot at 24 ¾ inches from
start point on each side of your
starting point on your horizontal
line
5
From each dot on your
horizontal line, draw a 12
inches long vertical line
6
On each vertical line, mark a
spot first at 3 inches and then
10 inches from horizontal
Line.(see figure A right side)
7
Insert the 4 anchors on
the 4 marked dots.
8
Secure the 4 screws
and leave 5/16 inches
between the screw head
and the anchors
9
Install the fireplace and
screw the 2 retaining screw
at there designated place
see page 6
Summary of Contents for volcan b12 fogo
Page 24: ...24 FIGURE G...