J. A. Roby SIRIUS, Instruction Manual

Page: 25 / 31

April 28th, 2016 25
Fiberglass rope replacement
Use a ½ inches (12.7mm) braided fiberglass rope.
It is possible to replace the braided fiberglass rope with the
door on the stove, but if you want you can remove door.
Fiberglass rope preparation
1) Take the end of the fiberglass rope and push fiber
inside to make a clean end.
2) Add little touch of high temperature latex inside the
end of the fiber glass rope.
3) Remove old fiberglass rope and clean the groove
4) Starting at the lower corner near the hinge put the
fiberglass rope into the grove without giving any
tension and cut it ½ inches over the require length
5) Take the fresh cut end of the fiberglass rope and push
the fiber inside to make a clean end.
6) Add high temperature latex inside the end of
fiberglass rope.
Fiberglass rope installation
1) Put a high temperature latex inside the clean groove
to glue the fiberglass rope.
2) Starting at the lower corner near the hinge put
fiberglass rope into the groove without giving any
tension
3) Align the two fiberglass rope ends and put some high
temperature latex between.
4) Install the door if you have uninstall it
What to do in case of Chimney
Fire
Contact your local authority to know what to do in case of
Chimney fire. And be sure to know procedure in case of
chimney fire.
1. Close all door and put the handle to secondary position.
2. Close damper
3. Spay water on combustible material around stove.
4. Call Fire department and trigger alarm.
5. Never touch the chimney while is burning.
6. Do an inspection to chimney and repair it when needed.
.
.