background image

 

15

LIGHTING 

 
Now  that  you  have  completed  the  installation  of  the  appliance  according  to  the 
recommendations, you are ready for the lighting! 
 
1. 

Place papers and small wood in the appliance. 

 
2. 

Before lighting, be sure that the chimney is warm enough. 

 
3. 

When  the  fire  is  well  lit,  gradually  add  bigger  wood  logs  until  an  ember  bed  is 
formed. 

 
4. 

You  can  then  control  combustion  by  closing  or  opening  the  air  intakes  (a  rod 
pulled down indicates a closed air intake). The wood will burn more quickly if the 
air intakes are opened to the maximum and more slowly if they are only slightly 
open. 

 

Do not charge the appliance beyond the bricks

PREVENTIVE MEASURES AND MAINTENANCE 

 
We recommend to open the air intakes completely and to maintain an intense fire from 10 
to 20 minutes per day. 
 
Verify  the  accumulation  of  creosote  every  week  that  you  use  the  appliance  until  you 
know  at  which  frequency  it  must  be  cleaned  (minimum  once  per  year).  Remove  every 
creosote deposit in order to prevent chimney fires. 
 
The  cleaning  of  the  heat  exchanger,  of  the  chimney  flue  pipe  and  of  the  pulling  fan,  if 
necessary, is particularly important at the end of each winter season in order to reduce the 
corrosion  made  during  the  summer  months  and  caused  by  the  accumulation  of  ashes 
(they  must  always  be  in  good  condition.)  To  clean  the  heat  exchanger,  remove  the  top 
bricks, clean them and then replace the bricks at their place. Do not remove the stainless 
steel pipes.

 

 
Do not alter or modify the air intakes of the appliance in order to get a stronger fire. 
 
To clean the glasses, J.A. Roby Inc. recommends using products sold for this purpose or 
an oven cleaner. Avoid cleaning with abrasives or when the glass is hot. 
 
The  Mystere  wood  appliance  is  provided  with  an  ashtray  under  the  door.  To  empty  it, 
remove the steel cap (in the middle of the appliance) and glide the ashes into the ashtray. 
Do not forget to replace the steel cap.  
 

Summary of Contents for Mystere



















Reviews: