September 13, 2016
17
INSTALLATION OF THE APPLIANCE
1- Fix the plenum to the appliance with 12
screws.
2- Fix the trapdoor in front of the furnace, on
the rectangular box with 2 screws.
3- Fix the front cover at the front of the furnace
with 4 screws.
4- Fix the wire support on the side of the
furnace with 2 screws.
5- Install the fan.
Remove the fan box cover (4 crews).
Remove the stee
l plate if it’s not
already done.
Install the bolt and the nuts (4).
Insert the bolt through the hole of the
fan and the fan box.
Screw the nuts with bolt from
rectangular hole.
