izzy FT-40EII, Instruction Manual

Page: 12 / 15

12
EN
Desk Fan FΤ-40EII
Parts of the Appliance
1. Screws
2. Base
3. Main body
4. Front protective cover
5. Securing cap for the grilles
6. Grilles
7. Protective cap for back cover
8. Back protective cover
9. Motor shaft
10. Head stand
11. Function / speed selection buttons
Assembly instructions
• Make sure that you have assembled
the appliance correctly before you use
the appliance.
ΙMPOrTANT : Do not use the
appliance if it is not placed
securely on to its base and / if
you have not assembled all parts
correctly. For safe assembly place
the appliance on a flat, steady
and dry surface in the up-right
position.
iMPOrTANT
: For your safety
always use the appliance in the
up-right position.
• Unpack carefully all parts of the
appliance.
• Assembly the appliance following the
steps below:
• Attach the main body to the base of the
device using the 4 screws included in
the packaging. Insert the screws from
the bottom of the base, rotate clockwise
and secure them with the fixing nuts
• Remove the protective cap for the
back cover from the motor tube. Adjust
the back protective cap on the motor
head, so that the 3 projections of
the head to enter the corresponding
recesses (holes) of the back protective
cover. Screw the protective cap of the
back cover by turning clockwise in
accordance with the words “TIGHT”
until it is secured fitted on the back
protective cover on the head of the fan.
• Insert the grilles on the motor shaft
so that the two recesses located on
the back of the grills apply to the two
protrusions on the motor shaft.