2.3
Pairing Clubs
NOTE:
This step is necessary prior to your first use and NOT prior to each subsequent round.
1.
Use
[Up/Down]
buttons to scroll to
Pair Clubs
. Press
[OK]
button to select.
2.
The screen will display a
“spinning arrow”
3.
While holding golf club, hold attached
Club Tag
near the
Sensor
(located in the
middle of the gray button panel).
4.
Once
Club Tag
is recognized, device will vibrate.
5.
Use
[Up/Down]
buttons to select
New
(for first time registration)
or Existing club
(for
re-registering a club) then press
[OK]
button.
6.
Use
[Up/Down]
buttons to select
Club Type
then press
[OK]
button.
7.
Use
[Up/Down]
buttons to scroll to the specific club, then press
[OK]
button to
assign the
Club Tag
to that club.
8.
Club is now paired with device.
9.
To pair another club, use
[Up/Down]
buttons to select
Yes
, then press
[OK]
button
to confirm.
10.
Repeat steps 1-9 until each club as been paired with the device.
11.
To re-assign a
Club Tag
to a different club, repeat steps 1-4 using the same
Club Tag
. You will be asked if you wish to re-assign the
Club Tag
. Select
Yes
, then
proceed with steps 5-7.
8
Using Swami on the Course
9
Getting Started
