background image

7

Last updated April 9, 2013 10:30 AM

© 2009 DAHON, BPSA • 2009.09.DS.EN

Part

Item to Check

Passed Remarks

Tires

Are free from physical damage or defect, are correctly seated in the right direction.

Have the correct air pressure, dust caps are present on the valves.

Wheels

Wheel rims, bearings and spokes are free of physical damage or defect.

 

Wheel nuts and spoke nipples are tight.

Front and rear wheel are free from wobble or buckle, do not foul the brake blocks, 

mudguards, or anything else.

 

Wheel quick release

Are correctly installed and adjusted.

Wheel bearings

Are correctly adjusted.

Reflectors

Are both present and securely fastened to the front and rear wheels, at the front of 

the bike and at the rear of the bike.

Bell

Is present and securely fastened to the handlebar

Accessories

Mudguards, racks, kickstands, and supports are firmly attached to the bodywork, 

all supports are in place and tight.

Lights

Lights and wiring are firmly attached and functioning correctly. If a dynamo hub is 

fitted, check that rotation direction is correct.

Owner Manual

The correct owner manual is supplied with the bicycle.

Folding and 

unfolding

Support bracket functions correctly.

Magnetix is correctly aligned.

Bike folds completely.

Bike stands stably when folded.

Bike unfolds completely.

6

Summary of Contents for E3 Compact










Reviews: