Copyright IXXAT Automation GmbH
iPC-I XC16/PCI - Manual, V1.3
Connections and displays
7
In the case of a non-galvanically isolated device version, CAN-ground and PC-
ground are connected to the same potential.
Maximum interference immunity is achieved when the shield of the CAN cable is
earthed.
The assignment of the Sub-D connector is shown in Table 3-1. As an option, the
bus connection can be galvanically isolated from the CAN bus.
Pin no.
Signal
1
CAN-low (fault tolerant),
(only automotive version)
2
CAN-low
3
GND
4
CAN-high (fault tolerant),
(only automotive version)
5
Not connected
6
Not connected
7
CAN-high
8
Not connected
9
Not connected
Table 3-1: Pin assignment of the CAN bus connection
Summary of Contents for iPC-I XC16/PCI
Page 4: ......
