
Connections and displays
Pin1
Figure 3-3: CAN connection terminal for the IXXAT CME/PN
Pin no. on connect-
or
Signal
1
PE
2
Galvanically isolated ground
3
CAN-High
4
CAN-Low
Table 3-3: Pinout of the CAN connector
3.2
Displays
The IXXAT CME/PN has six LEDs. These LEDs are used to display the com-
munication status of the associated interfaces and/or to display the device sta-
tus. The RJ45 connectors also each have two LEDs that display the link status
of the corresponding Ethernet port.
Figure 3-4:
Displays of the IXXAT CME/PN
Copyright IXXAT Automation GmbH
9
IXXAT CME/PN-Manual, Version 1.0
Summary of Contents for CME/PN
Page 1: ...Hardware Manual IXXAT CME PN CANopen PROFINET Gateway...
Page 4: ......