
Connections and displays
3 Connections and displays
3.1
Connection pinout
CAN1
Ethernet Port1
Ethernet Port2
LEDs
USB
Power
Figure 3-1:
Connections and displays on the IXXAT CME/PN
3.1.1 Power plug
A screw terminal is used to connect the IXXAT CME/PN to a power supply.
For the cabling, it is important for the cables to have a sufficient cross section
(>0.14mm
2
). The pinout of the screw terminal is shown in Table 3-1.
Figure 3-2:
Power plug for the IXXAT CME/PN
Copyright IXXAT Automation GmbH
7
IXXAT CME/PN-Manual, Version 1.0
Summary of Contents for CME/PN
Page 1: ...Hardware Manual IXXAT CME PN CANopen PROFINET Gateway...
Page 4: ......