24 (32)
7
Operation
Fig. 11
Ports and LEDs
1
Status LED
2
Power LED
3
Mini USB port
4
CAN LEDs 1 to 4
5
User LED
6
Ethernet LED
7
Link speed LED
8
Ethernet port
9
Link/Activity LED
10 CAN connector D-Sub 9 (CAN@net NT 100)
7.1
Ethernet Port
Designed as standard RJ45 port with pin allocation according to Ethernet standard. Because of
the Ethernet PHY auto-crossover feature the device can be connected with a crossover cable or
with a one-to-one network cable.
The shield of the port is connected to the ground of the printed board via a 1 nF capacitor.
Pin Allocation Ethernet Port
Pin no.
Signal
1
TX+
2
TX-
3
RX+
4
Connected to pin 5
5
Connected to pin 4
6
RX-
7
Connected to pin 8
8
Connected to pin 7
7.2
Mini USB Port
Provided to connect the device for configuration.
7.3
Indicators
7.3.1
Power LED
Indicates the status of the power supply.
1
4
5
2
3
9 8
7 6
10
CAN@net NT User Manual
4.01.0332.20000 1.7 en-US
