Support: 1-855-473-7449 or 1-408-943-4100
Email:
Page 6
2 Handling Hard Drives
TrueNAS Minis support iXsystems qualified hard drives up to 14 TiB. Drives designed for Network Attached Stor
-
age (NAS) are required. These drives run cooler and quieter than desktop drives. For the full list of qualified drives,
please see the
Drive Compatability List
https://www.truenas.com/truenas-mini/
.
When ordered without hard drives, drive trays are shipped with filler inserts to protect them. If not all bays will be
filled with drives, keep the fillers in the empty trays to protect them.
2.1 Removing Drive Trays
If a drive tray must be removed, release the latch by pushing the large circular button to the right (
1
). Swing the
latch to the left to eject the tray, then pull outwards on the latch to begin sliding the tray out (
2
). Grip the top and
bottom of the tray and gently remove it (
3
).
2.2 Removing Drive Fillers
To mount a hard drive in a tray, remove the two rear screws holding the filler (
1
). Gently spread both sides of the
tray away from the filler (
2
) until the pins release (
3
), then remove the filler.
