Support: 1-855-473-7449 or 1-408-943-4100
Email:
Page 4
3.4 Mount the Unit in the Rack
Caution: Two people are required to safely lift the chassis for rack installation or removal.
Do not install
drives until after the chassis has been installed in the rack, and remove all drives before removing the chassis from
the rack.
Lift the ES60 with attached cabinet rails and align the cabinet rails with the inside front of the rack rails.
Carefully slide the ES60 forwards into the rack rails until the unit stops (
1
). Locate the blue tabs on the inside of the
cabinet rails. Slide the tabs towards the front of the ES60 and hold them in place (
2
). Push the chassis into the rack
until the ears are flush with the front of the rack (
3
). The thumbscrews on the ears are used to secure the unit in the
rack after drive trays have been installed (
4
).
