CENTRE LIGHTS
The 3 LED centre lights in Tastic Neo models are designed to provide directional lighting in your
bathroom. For specific tasks like shaving or putting make-up on, you may need extra lighting to suit
your individual needs.
The heat lamps can also be used to provide additional bright illumination for your bathroom. Lighter
coloured walls and decor also help brighten your bathroom by reflecting more light.
VENTILATION
To ensure optimum performance of the exhaust fan, it is essential that there is adequate air flow into
your bathroom to help the Tastic’s efficient exhaust fan to remove steam while you shower, venting
directly outside. Your Tastic works by drawing steam-laden air from the room, and as with all exhaust
fans it is essential that sufficient air inlets are provided. Ensure adequate inlets exist through windows,
vents or under the door. Air flow path from inlet to fan should ideally pass over the steam source.
6
How it Works
Safety
The IXL
operation. To ensure you get the most from your Tastic there are a few simple points to keep in mind.
Tastic Neo range has been designed to exacting standards to give you many years of trouble-free
HEAT LAMPS
The IXL Tastic Neo uses 800W tungsten halogen heat lamps in conjunction with reflective elements,
for a more efficient dispersion of radiant heat. The tungsten halogen lamps provide instantaneous
heat, and are designed to heat you and not your bathroom - that’s the efficient way infra red heat
works. To get the full benefit of Tastic’s tungsten halogen warmth, stand directly under the heat lamps.
IXL’s exclusive halogen lamps have been designed specifically for this application, and concentrate
their heat for maximum effectiveness.
Make sure you have the Tastic model that suits your bathroom ceiling height. This Tastic is
manufactured to offer peak performance with bathroom ceiling heights up to 2.4 m
®
Tastic
Over-temperature switch (PTCR) (Hardwired & Commercial Tastic Neo):
When for any reason the temperature inside the unit reaches 80°C,
Tastic Neo. The PTCR can be reset by turning off power to the unit at the isolating switch and allowing to
cool for 10-15 minutes. In such a case the Service Centre should be called as this is not normal operation.
the PTCR will cut off power to the
Thermal fuse (Remote Tastic Neo only)
When for any reason the temperature inside the unit reaches 93°C,the thermal fuse will cut off power
to the Tastic Neo. In such a case the Service Centre should be called to replace the thermal fuse.
Thermal Switch (Commercial Tastic Neo only)
When for any reason the temperature inside the unit reaches 55°C,
power to the Tastic Neo. When the temperature drops, the thermal switch will reconnect the power.
the thermal switch will cut off
