®
Tastic
Heat Lamp Replacement
Filament
Socket
Heat Lamp
Refector
Preparing
Turn the heat lamp off and let it cool for at least 5 minutes.
the isolating switch.
Position a sturdy ladder of sufficient height to let you safely and comfortably reach the Tastic Neo.
Ask someone to hold the ladder if you can.
For extra safety, switch the power off at
Removing Glass Shield
With one hand gently press the glass shield (at a point close to the air inlet) 2 mm towards the
ceiling and carefully slide it towards the air inlet.
Hold your other hand below the other end of the shield to catch it when it drops.
®
If the shield chips, cracks or breaks, do not use the heat lamp without it. Replace it with IXL Tastic
Neo Tempered Glass Shield Part 12200, not normal household glass.
Removing Old Heat Lamp
A spring-loaded socket holds each end of the heat lamp.
Gently grasp the heat lamp and push it towards one socket.
When it is free of the other socket, carefully pull the heat lamp down towards you.
The heat lamp is not recyclable. Dispose of it like a normal incandescent light globe (i.e. unbroken,
with your general waste, wrapped in any paper or cloth you used).
Parts
